Fully Customizable Access Point for CueServer
CueTouch brings sophistication and technological elegance to CueServer 1 based lighting control applications.
CueTouch is available for CueServer 1 Products. For the best experience with CueServer 2, see Insite.





Application Examples

Restaurant Lighting

For the ultimate in control of the accent and table lighting in a restaurant, a CueTouch panel is used to give the owner direct control over the precise color of each table and accent area in the establishment as well as access to a few presets and a special light show.


For high-end applications, instead of using simple mechanical button stations, CueTouch is used to provide graphical control of the lighting in a commercial setting. Using custom scripting, each graphical element on the screen can mimic what lights are on in the actual environment in real-time.

Studio Control

A television studio uses CueTouch as a studio lighting control panel. This screen allows each set in the studio to be turned on individually or the light intensity to be adjusted manually. Multiple CueTouch panels are located in key areas as well as in the master control room.

Themed Entertainment

A museum exhibit uses CueTouch as an operator interface. Large on-screen buttons are provided as intuitive controls for an automated movie theater. Additional screen pages can be added to the panel to control other special features of the room.


A retail storefront uses CueTouch to control moving lights. This screen gives the store manager an easy way to change how products are highlighted by providing simple controls for position, color and gobo of an array of sophisticated moving light fixtures.

Technical Specifications

Technical Information

Type LED backlit TFT-LCD (256 Colors via Qlarity), analog resistive
Resolution 7" (177 mm), 800 x 480 WVGA
Pitch 0.19 mm x 0.19 mm
Port 1 EIA-232C, DB9F
Port 2 EIA-232C/422/485 Software Selectable, DB9F
Ethernet 10/100Base-T, RJ-45
USB USB 2.0 Full Speed port for USB memory stick
Power Requirements 10 to 32 VDC, 8 Watts @ 24 VDC
Processor Atmel ARM-9 196MHz
Memory 32MB RAM, 4MB NOR Flash
UL UL Listed
CE EN-55022, EN-55024, EN-60950
EMC FCC Part 15
Width 8.8" (224mm)
Height 6.1" (154m)
Depth 2.5" (65mm)
Depth Behind Panel 2.24" (57mm)
Cutout Width 7.83" (199mm)
Cutout Heigth 5.71" (145mm)
Weight 2.2 lbs. (1 Kg)
Operating Temperature -4° to 158° F (-20° to 70° C)
Storage Temperature -22° to 185° F (-30° to 85° C)
Relative Humidity 5% to 95% noncondensing
Altitude 10,000 feet maximum
Vibration 10 to 1500 Hz, 4g RMS
Shock 20g, 3ms, any axis
Sealing - Front Panel IP66, NEMA-4X

Part Numbers

CT-400 CueTouch LCD Panel
AC-12P 12VDC Power Supply with pigtail
AX-POE-IN Power-over-Ethernet Injector
AX-POE-SP12 Power-over-Ethernet 12VDC Splitter
CT-400-FMK Flush Mount Kit


CueTouch Flush Mount Kit

Product Description
  • Wall or flat panel mounting box for CueTouch CT-400.
  • Designed for both new and old construction.
  • Perfect for retrofits. It allows for easy mounting of CT-400 without an access to the back side of the panel or wall.
  • After the Flush Mount Kit is attached to the wall (using provided sliding brackets and screws), the CueTouch is held in place by strong rare earth magnets (included).
  • Powder coated edge visually blends together with the CT-400 housing.
  • Can be mounted on materials ranging in thickness from 3mm (0.1") to 38mm (1.5"). It accommodates all North American and EU (commercial and residential) drywall thickness.
  • Mounting hole cutout dimensions: 206x148mm (8.1x5.8")
  • In-wall depth - 88 mm (3.4").
  • Features several standard knockouts for conduit, as well as holes for screws or nails on all four sides for mounting directly to wall studs.
  • Accommodates Power-over-Ethernet splitter (EN-POE-SP12) behind CT-400.

Part Number: CT-400-FMK